Leadville Depot

[Paul R.]

Now to find windows and doors in HO, will use monster model works brick sheet walls that will be a start. Paul R.

[Paul R.]

Keith,
I wonder if you could organize the dormers and roof brackets to be printed in HO. I am building the depot in HO for the local club layout, not as good as yours and using available windows and doors from Tichy. The main structure is from Monster modelworks brickwork which is assembled and ready to tackle the roof. Paul R.

[Keith Hayes]

Paul, I can try, but the fine parts may not render in the smaller scale.

[Paul R.]

Keith ,
Thanks for trying, I could alter tichy windows to fit if that would make it easier. Paul R.

[Keith Hayes]

Paul, the roof brackets and dormers are posted for sale on my Shapeways site.You will need to add some shingles around the windows: I suggest the peel-n-stick shingles under the Vintage Reproductions label by CC Crow.

Please post a photo of your completed model.

[Paul R.]

Thanks Keith,
Just ordered, will see how long it takes. Just finishing the roof, not quite right but think I can fix it will
post a photo of current projects. Thanks again.Paul R.


On Mon, Sep 3rd, 2018 at 12:17 PM, "Keith Hayes [via C&Sng Discussion Forum]"
<[hidden email]> wrote:

>
>
> Paul, the roof brackets and dormers are posted for sale on my Shapeways
> site.You will need to add some shingles around the windows: I suggest the
> peel-n-stick shingles under the Vintage Reproductions label by CC Crow.
>
> Please post a photo of your completed model.
>
>
>
> -----
> Keith Hayes
> Leadville in Sn3
> _______________________________________________
> If you reply to this email, your message will be added to the discussion
> below:
> http://c-sng-discussion-forum.41377.n7.nabble.com/Leadville-Depot-tp1936p12308.html
>
> To unsubscribe from Leadville Depot, visit
> http://c-sng-discussion-forum.41377.n7.nabble.com/template/NamlServlet.jtp?

macro=unsubscribe_by_code&node=1936&code=cHJpY2hpZUB2aWMuY2hhcmlvdC5uZXQuYXV8MTkzNn
wxMjYxMTM0NzMx

[Keith Hayes]

Thanks for buying parts, Paul. I keep getting messages that the small dormer has an error,  yet when I try to fix the problem,  it just seems to make it worse. What are you seeing on your end?

[Paul R.]

I got 2 emails from Shapeways-firstproblem with dormer as you suggested, and 1a problem with
paypal. So today I bought the parts again, will see what happens now. Paul R.


On Wed, Sep 5th, 2018 at 1:35 PM, "Keith Hayes [via C&Sng Discussion Forum]"
<[hidden email]> wrote:

>
>
> Thanks for buying parts, Paul. I keep getting messages that the small
> dormer
> has an error,  yet when I try to fix the problem,  it just seems to make
> it
> worse. What are you seeing on your end?
>
>
>
> -----
> Keith Hayes
> Leadville in Sn3
> _______________________________________________
> If you reply to this email, your message will be added to the discussion
> below:
> http://c-sng-discussion-forum.41377.n7.nabble.com/Leadville-Depot-tp1936p12317.html
>
> To unsubscribe from Leadville Depot, visit
> http://c-sng-discussion-forum.41377.n7.nabble.com/template/NamlServlet.jtp?

macro=unsubscribe_by_code&node=1936&code=cHJpY2hpZUB2aWMuY2hhcmlvdC5uZXQuYXV8MTkzNn
wxMjYxMTM0NzMx

[Paul R.]

Keith,
I seem to have had no problems with the reorder at this stage , here's hoping. Several photos included, first showing current projects , the others the depot in stages I would like to know if the last photo is a good colour representation of the brickwork.Paul R.

[Keith Hayes]

Looking good, Paul.

I received notice that the parts printed,  so you should receive them in a few days. I hope the roof brackets match your roof pitch.

[Paul R.]

Keith ,
I got an email yesterday that they had been posted.I was wondering if the roof was a bit high, must
check that, one way or another the brackets will fit! Paul R.


On Wed, Sep 12th, 2018 at 9:14 PM, "Keith Hayes [via C&Sng Discussion Forum]"
<[hidden email]> wrote:

>
>
> Looking good, Paul.
>
> I received notice that the parts printed,  so you should receive them in
> a
> few days. I hope the roof brackets match your roof pitch.
>
>
>
> -----
> Keith Hayes
> Leadville in Sn3
> _______________________________________________
> If you reply to this email, your message will be added to the discussion
> below:
> http://c-sng-discussion-forum.41377.n7.nabble.com/Leadville-Depot-tp1936p12352.html
>
> To unsubscribe from Leadville Depot, visit
> http://c-sng-discussion-forum.41377.n7.nabble.com/template/NamlServlet.jtp?

macro=unsubscribe_by_code&node=1936&code=cHJpY2hpZUB2aWMuY2hhcmlvdC5uZXQuYXV8MTkzNn
wxMjYxMTM0NzMx

[Jeff Young]

Great looking brickwork, Paul.  Is that Monster Modelworks brick?

[Paul R.]

Hello Jeff,
Yes that is monster model works, not easy to cutout for windows and doors but worth it.Paul R.


On Wed, Sep 12th, 2018 at 10:37 PM, "Jeff Young [via C&Sng Discussion Forum]"
<[hidden email]> wrote:

>
>
>
> Great looking brickwork, Paul.  Is that Monster Modelworks brick?
>
>
>
>
> _______________________________________________
> If you reply to this email, your message will be added to the discussion
> below:
> http://c-sng-discussion-forum.41377.n7.nabble.com/Leadville-Depot-tp1936p12354.html
>
> To unsubscribe from Leadville Depot, visit
> http://c-sng-discussion-forum.41377.n7.nabble.com/template/NamlServlet.jtp?

macro=unsubscribe_by_code&node=1936&code=cHJpY2hpZUB2aWMuY2hhcmlvdC5uZXQuYXV8MTkzNn
wxMjYxMTM0NzMx

[Jeff Young]

I wish I had more brick buildings, but aside from the Lime Kiln at Silica, the only brick building in the areas I’m modelling is the brick outhouse at Marshall Pass.

A funny little thing it is, too:

On 13 Sep 2018, at 01:17, Paul R. [via C&Sng Discussion Forum] <[hidden email]> wrote:

Hello Jeff,
Yes that is monster model works, not easy to cutout for windows and doors but worth it.Paul R.

[Robert McFarland]

The Gilman/Pacific at Como had one too-look at the photo of the  ruins.

[Jim Courtney]

Don't forget about the Masonic Hall at Kokomo:


http://hdl.loc.gov/loc.pnp/hhh.co0029/photos.311634p

[Jeff Young]

Hi Jim,

It's a lovely building (and a favourite of Muriel's), but it's actually wood.  You can see it better from this angle:



Cheers,
Jeff.

[Jim Courtney]

Well "Monster Brick" looks like brick, but is actually wood -- so what's the problem?

[Keith Hayes]

Paul, did the parts show up yet? Did they print okay?

In totally different news, Jake Johnson posted a link to a Shapeways site with a HOn3 model of D&RGW Gunnison parlor car, and, better yet A Baggage-mail 10-11 and a 911. The model builder is linen. I am going to see if he is willing to scale it up.

In the mean time, Jeff, you have some nice models available.

[Paul R.]

Keith,
Not yet, should be soon, usually takes a bit longer to AU. Paul R.