C&S Profiles

Previous Topic Next Topic
 
classic Classic list List threaded Threaded
15 messages Options
Reply | Threaded
Open this post in threaded view
|

C&S Profiles

Ken Martin
Keith asked:
Is there a profile of the line in the C&S folios like the D&RGW has?

I have posted a set of Condensed Profiles in the files section of the blog.
These are from 1918 and show all the way to Baldwin.

Ken Martin
Reply | Threaded
Open this post in threaded view
|

Re: C&S Profiles

Jim Courtney
Thanks so much for posting these, Ken.
Jim Courtney
Poulsbo, WA
Reply | Threaded
Open this post in threaded view
|

Re: C&S Profiles

Keith Hayes
In reply to this post by Ken Martin
Thanks Ken--these are great. But do you have Como-Leadville?
Keith Hayes
Leadville in Sn3
Reply | Threaded
Open this post in threaded view
|

Re: C&S Profiles

South Park
  When I go to the blog, click on "files", I see nothing resembling a a listing
for a profile map/s.  Am I missing something ?
"Duty above all else except Honor"
Reply | Threaded
Open this post in threaded view
|

Re: C&S Profiles

Todd Hackett
South Park wrote
When I go to the blog, click on "files", I see nothing resembling a a listing
for a profile map/s.  Am I missing something ?
It's the third entry from the top when I go to files.
C&S 1918 Condensed Profiles - Ken Martin
Here
Reply | Threaded
Open this post in threaded view
|

Re: C&S Profiles

Ken Martin
In reply to this post by Keith Hayes
Thanks Ken--these are great. But do you have Como-Leadville?

Oops I forgot it. I just sent it to Daryl to add to the files

Ken Martin
Reply | Threaded
Open this post in threaded view
|

Re: C&S Profiles

Lee Gustafson
Ken,

Great information thanks very much.

Lee Gustafson
Reply | Threaded
Open this post in threaded view
|

Re: C&S Profiles

Darel Leedy
Administrator
In reply to this post by Ken Martin
FYI - The High Line profile has been added to the files folder. Thanks Ken!
Reply | Threaded
Open this post in threaded view
|

Re: C&S Profiles

South Park
  Thanks for these.  Fun stuff.

  Is it just me, or do others want a dash-mounted gauge in their
car that tells the gradient percentage while driving ?  I often think
of trains pulling grades in these old photos as I am driving and
wonder what the difference between 3% and 4% feels like as I
drag a heavy load up a hill.

  Never have been able to find such a critter available.
"Duty above all else except Honor"
Reply | Threaded
Open this post in threaded view
|

Re: C&S Profiles

Todd Hackett
South Park wrote
...a dash-mounted gauge in their car that tells the gradient percentage while driving ...
I put a couple of tilt gauges in my first 4WD (back in the 1980s), one on the dash to show side tilt, the other on the b pillar to show grade.  They weren't calibrated in percent, but it should be fairly easy to find a place to park on a 1%, 2%, etc grade and in mark those points.  They were intended to be attached to a trailer for leveling, and should be available at RV stores. I bought mine at a 4X4 store, and was instructed to keep an eye on them when I'm on a tricky slope. That way, if I roll,  I can see what my limit was and would know just far I could push it next time;).
Reply | Threaded
Open this post in threaded view
|

Re: C&S Profiles

Chris Walker
Todd,

did you teach that to Joe Crea or did he teach you?  

Joe whilst taking me on several trips, delighted in driving along the edge with the driver's side way higher than the passenger.  The numerous switchbacks on the A.C. were quite unnerving at that angle for this flatlander.
UpSideDownC
in New Zealand
Reply | Threaded
Open this post in threaded view
|

Re: C&S Profiles

Don Peterson
In reply to this post by Todd Hackett
I seem to recall being a test subject on one fateful trip over Imogene pass! Does the phrase "Hey Don, can you get out and guide me across that talus slope..." Or "Hey Don, watch this!",  ring a bell?

Well we are still here to tell the tale, so...

Don
Reply | Threaded
Open this post in threaded view
|

Re: C&S Profiles

snapped_bolt
In reply to this post by South Park


  Hey!

    I imagine a digital or analog inclinometer could be installed in a vehicle.
    First- find a place where are tires sit level- check and equalize air pressure
    Install inclinometer on first metal part found behind the polyethylene or skinned foam dashpiece.
    Adjust inclinometer to level.

     VoilĂ !

      You are set until someone is jarred out of their seat and damages the device.

       Cheers!

          Stan
Reply | Threaded
Open this post in threaded view
|

Re: C&S Profiles

Todd Hackett
In reply to this post by Don Peterson
Don,

I think that was the same trip where we drove to the east portal of the Alpine Tunnel. As we approached the parking area with room to turn around, there was a spot where the road narrowed because of a boulder that slid down. The road had quite a side slope by that boulder, and it had a fresh layer of ice.  We had the choice of driving on the slick and narrow road and hoping we didn't slide off and roll down the hill, turning around then driving across it again, or backing several miles to a spot wide enough to turn around. That was about 25 years ago, but I'm pretty sure you said something like "I think you should go for it.  You probably won't slide off. Why don't I get out, walk across, and guide you." I interpreted that as "I don't want to roll down the hill if this doesn't work, and besides, there should be a surviving witness to tell the story."
Reply | Threaded
Open this post in threaded view
|

Re: C&S Profiles

Don Peterson
I forgot about that part of the trip. Guess its a good thing we made it through.It would have been a long walk back to St Elmo for help.

Don