Re: Modelling stub switches

Posted by Jeff Young on Aug 30, 2015; 3:02pm
URL: http://c-sng-discussion-forum.254.s1.nabble.com/Modelling-stub-switches-tp2408p3310.html

Headblock soldered up:



Rail is code 55.

Headblock is a shortened S-scale standard gauge PC-board turnout tie (0.141" x 0.0625").  The copper had to be filed off the back to match the height of my Mt Albert wood ties.

The outside stops are 0.5mm x 1.5mm brass soldered to the headblock.  

I'm going to try some NBW castings on top of the stops to match the prototype.

Cheers,
Jeff.