Re: C&S Standard 4' x 5' Water Closet
Posted by Norm Acker on Oct 12, 2024; 1:18pm
URL: http://c-sng-discussion-forum.254.s1.nabble.com/C-S-Standard-4-x-5-Water-Closet-tp10181p20203.html
To revive an older thread, here's a board and batten version in Buffalo, still there as of earlier this year. I need several of these for South Platte, so I'm going to try to 3d print them. I've since removed the door batten and am trying to figure out vertical board grooves for the door. If I get that figured out I'll probably remove the battens and try to do the vertically sided version as well. We'll see if I get ambitious enough to try for an interior and partly open door. :)
URL: http://c-sng-discussion-forum.254.s1.nabble.com/C-S-Standard-4-x-5-Water-Closet-tp10181p20203.html
To revive an older thread, here's a board and batten version in Buffalo, still there as of earlier this year. I need several of these for South Platte, so I'm going to try to 3d print them. I've since removed the door batten and am trying to figure out vertical board grooves for the door. If I get that figured out I'll probably remove the battens and try to do the vertically sided version as well. We'll see if I get ambitious enough to try for an interior and partly open door. :)
Norm in Littleton, CO
- on the C&S Silica Branch
- on the C&S Silica Branch
| Free forum by Nabble | Edit this page |