Re: CONX 14

Posted by Keith Hayes on
URL: http://c-sng-discussion-forum.254.s1.nabble.com/CONX-14-tp18668p19149.html

Now that the Narrow Gauge Convention is over, it is time to return to modelling. CONX 14 got set aside as I cleaned up the layout for visitors. All the holes are drilled through the frame and the tank is sanded and primed and glossed up so I can place the vinyl rivet decals.

One feature if the prototype that is very appealing is the home made handrail that extends along each side. This is fabricated from 2" or 3" angle. Once again,  time has been my friend.  At the convention Simpson had packages of 3/8" x 3" brass strip. I bought a few and tried to make my first angle today.

True confession: this was really fiddly. I need to make 10 of these and the end brackets also have a diagonal brace. I made one so it stands to reason I can make ten of these. Then I can take on the baggage car and the Pullman line car.

This is supposed to be my last scratch build for the MMR Rolling Stock AP. Model Railroading is Fun...Model Railroading is Fun!