Re: How to pick up power for DCC in OMI Cabooses (Sn3)

Posted by Keith Hayes on
URL: http://c-sng-discussion-forum.254.s1.nabble.com/How-to-pick-up-power-for-DCC-in-OMI-Cabooses-Sn3-tp919p1596.html

Derrell, following your lead, I have thrown caution to the wind and started my install on C&S 1000.

I have the pickup wire soldered to a piece of circuit board, which is epoxyed to the frame. A second wire is soldered to the frame.

(Good thing my local Radio Shack is still open)

If only Ajin would have spent just a bit more time designing these cars, finishing them would be so much easier.

I may yet opt to get the less virul current keeper.

Enough for today: time for the epoxy to cure.