Re: Type C/UP trucks

Posted by John Greenly on Apr 19, 2020; 7:54pm
URL: http://c-sng-discussion-forum.254.s1.nabble.com/Type-C-UP-trucks-tp15497p15509.html

Michael,
it's great that you are doing this!  I need some of the type C/UP  trucks in HO scale, if you can do it.  I would probably use 8 pairs.

I could use Kaydee wheelsets.  The pointed axles are .640" long point-to-point.  The  cone of the point is about .050" long and goes to .060" diameter, so the cone half-angle is 30 degrees.    It's .505" from  the outside face of one wheel to the other.  

I can't be the only person making cars in HOn3 that need these trucks...  am I?

thanks,
John Greenly
Lansing, NY